Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.6 .

Digital inputs 1 and 2

Important

This section only concern users of Asycube 240, 380 and 530.

A standard M8 three-pins male cable enables to read two different signals, it must be connected as follows :

../../_images/digital_input_1_and_2.png

Fig. 27 Digital input

Pin

Signal

(1)

+24DC OUT (sensor power supply)

(2)

0V GND

(3)

Input (+24VDC)

Note

On the Asycube 240 the purging option requires the use of digital input 2.

Connector type (on Asycube side) : M8, 3P, female.