Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.6 .

Terminal

On the TERMINAL page (Fig. 114), you can send commands to the Asycube and see what it replies.

../_images/terminal_page.png

Fig. 114 Terminal page

The terminal is useful to test the different commands and see the replies given by the Asycube prior to developing the communication with the Asycube. It can also be used to change some specific options that could not be changed through Asycube Studio.

Tip

You don’t have to send the CRLF sign to the Asycube, the terminal will do it for you. You can also omit the brackets, Asycube Studio will add them before sending the message.

However, both elements are required for real communication with an Asycube.

Note

The list of available commands can be found in the TCP/IP section.