Digital inputs 1 and 2

Important

This section only concern users of Asycube 240, 380 and 530.

A standard M8 three-pins male cable enables to read two different signals, it must be connected as follows :

Fig. 27 Digital input

Pin	Signal
(1)	+24DC OUT (sensor power supply)
(2)	0V GND
(3)	Input (+24VDC)

Note

On the Asycube 240 the purging option requires the use of digital input 2.

Connector type (on Asycube side) : M8, 3P, female.