Warning
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2023.9 .Digital inputs 1 and 2
Important
This section only concern users of Asycube 240, 380 and 530.
A standard M8 three-pins male cable enables to read two different signals, it must be connected as follows :
Fig. 27 Digital input
Pin |
Signal |
|---|---|
(1) |
+24DC OUT (sensor power supply) |
(2) |
0V GND |
(3) |
Input (+24VDC) |
Note
On the Asycube 240 the purging option requires the use of digital input 2.
Connector type (on Asycube side) : M8, 3P, female.