Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.12 .

Technical data tables

This chapter contains the technical parameters necessary to correctly install Asycube products.

Acronyms

ØD	diameter of the round buffer APSOvib
G	thread diameter
H	height of the round buffer APSOvib
cz	spring constant of the round buffer APSOvib; compression in Z direction (axial direction)
Fz	max. allowed compressive force of the round buffer APSOvib
L	thread length / male
s	thread depth / female

Support characteristics

Note

The thickness of the support must be calculated basing on requirements resumed in the table Make sure that the minimal mass [M] requirement is respected.

Asycube	50	80	240	380	530
M [Kg]	≥ 10	≥ 10	≥ 40	≥ 200	≥ 250
A [mm]	≤ 600	≤ 600	≤ 600	≤ 1000	≤ 1200
B [mm]	≤ 150	≤ 150	≤ 350	≤ 500	≤ 750

Screws detail

Asycube	50	80	240	380	530
Qty. of screws	2	4	4	4	4
Screw Ø	M5	M5	M6	M8	M8

Vibration isolators details

Table 85 Angst + Pfister isolators - https://www.apsoparts.com - (section: Antivibration Technology; APSOvib)

	Vibration isolator (Round / Rubber buffers)
Recommended for	Asycube 240	Asycube 380	Asycube 530
APSO Ref.	12.2034.0103	12.2034.0293	12.2034.0353
ØD [mm]	16	40	50
H [mm]	20	40	50
G [mm]	M5	M8	M10
L [mm]	12	25	25
s [mm]	3	8	10
cz [N/mm]	50	180	190
Fz [N]	120	690	1000
Qty. [-]	4	4	4

Table 86 Elesa isolators – https://www.elesa.com – (section: Rubber buffers)

	Vibration isolator (Round / Rubber buffers)
Recommended for	Asycube 240	Asycube 380	Asycube 530
ELESA Ref.	411771 DVA.2-15-20-M4-10-55	412021 DVA.2-50-45-M10-28-55
ØD [mm]	15	50
H [mm]	20	45
G [mm]	M4	M10
L [mm]	10	28
s [mm]	4	10
cz [N/mm]	47	182
Fz [N]	234	2046
Qty. [-]	4	4

Fig. 211 Vibration isolator (round buffer) details

Important

Make sure that total mass of Asycube, support and components will not exceed the max. allowed compressive force of the round buffers [Fz]. If this scenario occurs new round buffers must be selected.