Installation and Connection
To install and execute Asycube Studio, you need the following elements:
Computer with Windows 10 or higher (64-bit)
Admin access to install the software for all users, otherwise local installation is possible
Step 1: Launch the downloaded windows installer.
Step 2: Read and accept the license agreement.
Step 3: Choose if the software will be installed for you only or for all users (will require admin credentials).
Step 4: Validate and wait for the installation to complete.
Step 5: Installation is complete. Choose if you want to open Asycube Studio now or later.
Only one instance of Asycube Studio should be connected to each Asycube. Also, we do not advise to use Asycube Studio and Asyril HMI in parallel.
When starting Asycube Studio, no Asycube is connected. To connect to an Asycube, click on
CTRL + SHIFT + X) or
click on Asycube in the application menu and select Connect Asycube.
The list of Asycube IP Settings will open (Fig. 88). On first startup, only the default Asycube IP Settings is suggested.
If your Asycube is new, it will connect to the default address. Click on Home page.on the first line to establish the connection. You will now access to the
You can connect to an Asycube on a different IP Address using ADD IP ADDRESS button. This will allow you to specify the IP Address and the port to connect to.
Validate withwhen finished.
If you do not remember the IP Address of the Asycube, refer to Recover IP address using default IP address.
If the CONNECT button is grayed. This means that Asycube Studio was not able to detect an Asycube on this IP Settings. Verify that the IP Address of your computer is correct (see How to change the IP Address on your Windows PC?).