Warning
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.6 .Purge connector
Important
This section only concern users of Asycube 380/530.
A standard M8 four-pin male cable is used to transmit the signals with the purge system.
![../../_images/purge_connector.png](../../_images/purge_connector.png)
Fig. 30 Purge connector
Pin |
Waveform |
---|---|
(1) |
24VDC |
(2) |
Digital input 24 VDC |
(3) |
0 V GND |
(4) |
Digital output 24 V DC 500 mA |
Tip
Refer to section Purging platform to get more information about the purge.