Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.12 .

Installation and Connection

Prerequisite

To install and execute Asycube Studio, you need the following elements:

Computer with Windows 10 or higher (64-bit)
Admin access to install the software for all users, otherwise local installation is possible

Download

Latest version of Asycube Studio can be downloaded here.

Installation

Step 1: Launch the downloaded windows installer.

Step 2: Read and accept the license agreement.

../_images/installation_license.png — Fig. 81 Asycube Studio Software License Agreement

Step 3: Choose if the software will be installed for you only or for all users (will require admin credentials).

../_images/installation_options.png — Fig. 82 Asycube Studio Installation Options

Step 4: Validate and wait for the installation to complete.

../_images/installation_installing.png — Fig. 83 Asycube Studio Installing

Step 5: Installation is complete. Choose if you want to open Asycube Studio now or later.

../_images/installation_complete.png — Fig. 84 Asycube Studio Installation Complete

Connection

Important

Only one instance of Asycube Studio should be connected to each Asycube. Also, we do not advise to use Asycube Studio and Asyril HMI in parallel.

../_images/studio_unconnected.png — Fig. 85 Asycube Studio unconnected page

When starting Asycube Studio, no Asycube is connected. To connect to an Asycube, click on CONNECT ASYCUBE, or use the shortcut (CTRL + SHIFT + X) or click on Asycube in the application menu and select Connect Asycube.

The list of Asycube IP Settings will open (Fig. 86). On first startup, only the default Asycube IP Settings is suggested.

../_images/connect_asycube.png — Fig. 86 List of existing Asycube IP Settings

If your Asycube is new, it will connect to the default address. Click on CONNECT on the first line to establish the connection. You will now access to the Home page.

Note

You can connect to an Asycube on a different IP Address using ADD IP ADDRESS button. This will allow you to specify the IP Address and the port to connect to.

../_images/add_ip_address.png — Fig. 87 Add Asycube IP Address window

Validate with ADD IP ADDRESS when finished.

Tip

If you do not remember the IP Address of the Asycube, refer to Recover IP address using default IP address.

Tip

If the CONNECT button is grayed. This means that Asycube Studio was not able to detect an Asycube on this IP Settings. Verify that the IP Address of your computer is correct (see How to change the IP Address on your Windows PC?).