Technical data tables

Important

This section does not concerned the Asycube Clean 230. Please refer to the Integration of Asycube Clean 230 dedicated section.

This chapter contains the technical parameters necessary to correctly install Asycube products.

Acronyms

ØD	diameter of the round buffer APSOvib
G	thread diameter
H	height of the round buffer APSOvib
cz	spring constant of the round buffer APSOvib; compression in Z direction (axial direction)
Fz	max. allowed compressive force of the round buffer APSOvib
L	thread length / male
s	thread depth / female

Support characteristics

Note

The thickness of the support must be calculated basing on requirements resumed in the table Make sure that the minimal mass [M] requirement is respected.

Asycube	50	80	240	380	530
M [Kg]	≥ 10	≥ 10	≥ 40	≥ 200	≥ 250
A [mm]	≤ 600	≤ 600	≤ 600	≤ 1000	≤ 1200
B [mm]	≤ 150	≤ 150	≤ 350	≤ 500	≤ 750

Screws detail

Asycube	50	80	240	380	530
Qty. of screws	2	4	4	4	4
Screw Ø	M5	M5	M6	M8	M8

Vibration isolators details

Table 7 Angst + Pfister isolators - https://www.apsoparts.com - (section: Antivibration Technology; APSOvib)

	Vibration isolator (Round / Rubber buffers)
Recommended for	Asycube 240	Asycube 380	Asycube 530
APSO Ref.	12.2034.0103	12.2034.0293	12.2034.0353
ØD [mm]	16	40	50
H [mm]	20	40	50
G [mm]	M5	M8	M10
L [mm]	12	25	25
s [mm]	3	8	10
cz [N/mm]	50	180	190
Fz [N]	120	690	1000
Qty. [-]	4	4	4

Table 8 Elesa isolators – https://www.elesa.com – (section: Rubber buffers)

	Vibration isolator (Round / Rubber buffers)
Recommended for	Asycube 240	Asycube 380	Asycube 530
ELESA Ref.	411771 DVA.2-15-20-M4-10-55	412021 DVA.2-50-45-M10-28-55
ØD [mm]	15	50
H [mm]	20	45
G [mm]	M4	M10
L [mm]	10	28
s [mm]	4	10
cz [N/mm]	47	182
Fz [N]	234	2046
Qty. [-]	4	4

Fig. 24 Vibration isolator (round buffer) details

Important

Make sure that total mass of Asycube, support and components will not exceed the max. allowed compressive force of the round buffers [Fz]. If this scenario occurs new round buffers must be selected.