Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2023.9 .

Exchanging / Installing the backlightļƒ

Important

Be sure that all power sources and other cables to the unit are disconnected before changing the backlight.

Material needed :

  • New backlight assembly delivered by Asyril

  • Flat wrench size 5.5

  • Torx key size 10

Step 1: Remove the platform module (A)

Step 2: Remove the four screws (B)

Step 3: Unplug the backlight connector. (C)

Step 4: Place the new backlight

../../_images/ex_ins_backlight_part_50.png

Step 5: Screw the four screws (0.2 Nm)

Step 6: Remount the platform module