Installation and storage
Installation environment
Caution
The Asycube must be mounted on a smooth, flat and strong surface. Ensure yourself that the Asycube is not submitted to mounting flexure. Failure to do so would degrade feeder’s performance and cause mechanical hazard. For more information please refer to the mechanical integration
The Asycube 50/80 can be used under following conditions:
Parameters |
Specifications |
|---|---|
Storage Temperature |
+5°C to 40°C |
Operating Temperature |
+5°C to 40°C |
Humidity |
Operating: 30% to 80% non-condensing |
Ingress Protection |
IP20 |
Caution
In the case humidity or temperature variation, note that it might affect the global performances of the Asycube and cause electrical hazard.
Important
Do not use the product in an atmosphere of corrosive gases. Rust may form and reduce the structural strength of the product.
Avoid extreme electromagnetic waves, ultraviolet rays and radiation.
Avoid using the product in a place where the main unit or controller may be exposed to water or oil droplets.
The Asycube 240 can be used under following conditions:
Parameters |
Specifications |
|---|---|
Storage Temperature |
+5°C to 40°C |
Operating Temperature |
+5°C to 40°C |
Humidity |
Operating: 30% to 80% non-condensing |
Ingress Protection |
IP20 |
Caution
In the case humidity or temperature variation, note that it might affect the global performances of the Asycube and cause electrical hazard.
Important
Do not use the product in an atmosphere of corrosive gases. Rust may form and reduce the structural strength of the product.
Avoid extreme electromagnetic waves, ultraviolet rays and radiation.
Avoid using the product in a place where the main unit or controller may be exposed to water or oil droplets.
The Asycube 380/530 can be used under following conditions:
Parameters |
Specifications |
|---|---|
Storage Temperature |
+5°C to 40°C |
Operating Temperature |
+5°C to 40°C |
Humidity |
Operating: 30% to 80% non-condensing |
Ingress Protection |
IP20 |
Caution
In the case humidity or temperature variation, note that it might affect the global performances of the Asycube and cause electrical hazard.
Important
Do not use the product in an atmosphere of corrosive gases. Rust may form and reduce the structural strength of the product.
Avoid extreme electromagnetic waves, ultraviolet rays and radiation.
Avoid using the product in a place where the main unit or controller may be exposed to water or oil droplets.
The Asycube Clean 230 can be used under following conditions:
Parameters |
Specifications |
|---|---|
Intended use |
Indoor |
Storage Temperature |
+5°C to 40°C |
Operating Temperature |
+5°C to 40°C |
Humidity |
max 80% |
Ingress Protection |
IP65 [1] |
Altitude max |
2000 m |
Overvoltage category |
II |
Pollution degree |
II |
Power supply voltage fluctuation |
±10% |
Important
Avoid extreme electromagnetic waves, ultraviolet rays and radiation.
Note
For cleanroom application, please refer to Certification for cleanroom application
Storage Environment
The storage environment should be similar to the operating environment. In addition, the Asycube should be protected from the dust.