Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.6 .

Anti-roll plates

Anti-roll platforms are machined with pyramids on the picking surface. This structure leads to reduce stabilization time of parts after vibrations, like cylinders, needles or coins for example.

Fig. 36 Difference between flat and anti-roll plate

Different sizes and designs of pyramids for different sizes of parts are available.

Fig. 37 Geometry of standard anti-roll platform’s structure for small parts

Table 4 Standard anti-roll platforms for small parts

	A	B	C	D	Art.	Suitable for parts
Asycube 50	0.7	0.5	0.25	90	000.101.526	ø 0.35mm – ø 0.75mm
Asycube 50	1.7	1.5	0.75	90	000.102.385	ø 0.75mm – ø 2mm
Asycube 80	1.25	1	0.5	90	000.101.518	ø 0.7mm – ø 1.5mm
Asycube 80	2.75	2.5	1.25	90	000.102.405	ø 1.5mm – ø 3.5mm
Asycube 240	1.25	1	0.5	90	000.105.800	ø 0.7mm – ø 1.5mm
Asycube 240	3	2.5	1.25	90	000.101.515	ø 1.7mm – ø 3.5mm
Asycube 240	5.5	5	2.5	90	000.102.433	ø 3.5mm – ø 7mm
Asycube 240	10.5	10	5	90	000.102.445	ø 7mm – ø 14mm
Asycube 380	3	2.5	0.722	120	000.105.319	ø 3mm – ø 5mm
Asycube 380	5.5	5	1.443	120	000.102.940	ø 5mm – ø 10mm
Asycube 530	3	2.5	0.722	120	000.106.168	ø 1.7mm – ø 3.5mm
Asycube 530	6.5	6	1.732	120	000.103.187	ø 6mm – ø 12mm

Fig. 38 Geometry of standard anti-roll platform’s structure for large parts

Table 5 Standard anti-roll platforms for large parts

	A	B	C	D	E	Art.	Suitable for parts
Asycube 380	10.5	12	5.31	120	2	000.102.593	ø 10mm – ø 24mm
Asycube 530	12.5	14	4.9	120	4	000.103.184	ø 12mm – ø 28mm