Warning
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.6 .RP4 - Get alarm
Command
RP4
Returns
RP00004:<alarm>, where
<alarm>is the activated alarm
Description
The alarms are described in the table below. Use the command WP5=0 to clear the alarms.
Define |
Value |
Comment |
ALARM_PLATFORM |
0x01 |
Platform above max temperature |
ALARM_HOPPER |
0x02 |
hopper above max temperature (only for Asycube 50/80) |
ALARM_AMPLIFIER |
0x04 |
Amplifier fault (only for Asycube 380/530) |
ALARM_PURGE |
0x08 |
The purge has not been closed before the timeout |
ALARM_NO_S_POWER |
0x10 |
No S-Power |
ALARM_6 |
0x20 |
N.C |
ALARM_BACK_LT |
0x40 |
Backlight timeout reached |
ALARM_8 |
0x80 |
N.C |
Usage Example
In the example below, the alarm platform 0x01 and alarm hopper 0x02 are activated
Command : RP4
Response : RP00004:00003