Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.6 .

TCP/IP

The host computer communicates with the Asycube using protocol Ethernet TCP/IP. The Asycube is the TCP/IP server and the host computer is the TCP/IP client. The server (the Asycube) sends packets only in response to a client request.

Default TCP/IP parameters are:

IP Address	192.168.127.254
Subnet Mask	255.255.255.0
TCP port	4001

These parameters can be changed in configuration page of the Asycube Studio. If parameters are unknown (connection cannot be established), use the Recover IP address using default IP address procedure. Using this procedure enables the connection to the Asycube with the default parameters and modification of the lost parameters.