Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.6 .

Purging platforms

When a quick change of component is required, the purge option allows you to easily switch from making an “A” product to a “B” product and thus reduce changeover time while avoiding operator intervention during production. The purging principle is different for each Asycube :

The purge option for the Asycube 50 and 80 consists in :

(A) a platform with a special geometry, which allows the components to be evacuated.

(B) a box receiving purged components placed below the hopper. This box can be removed without tooling.

../_images/purging_platforms_50_80.png — Fig. 80 Purge option

Mechanical interfaces

../_images/mechanical_interface_purge_50_80.png

	50	80
A	68.7 mm	90.7 mm
B	1 mm	1 mm
C	3.5 mm	3.5 mm
D	2.5 mm	3.5 mm
E	5.5 mm	5.5 mm
F	45°	45°

../_images/mechanical_interface_purge.png

Asycube 240
A	199 mm
B±stroke	144±2 mm
C±stroke	132±2 mm
D	180 mm
E	152 mm
F	4 mm
G	54 mm
H	201 mm
I±stroke	149±2 mm
L	Stainless steel 1.4301
M	Stainless steel 1.4301
N	POM (see product list)

../_images/mechanical_interface_purge_380_530.png

	Asycube 380		Asycube 530
Frame height	H=60mm	H=85mm	H=68mm	H=100mm
A	287 mm	287 mm	404 mm	404 mm
B ± stroke	307±6 mm	332±6 mm	329±8 mm	361±8 mm
C ± stroke	306±6 mm	331±6 mm	327±8 mm	359±8 mm
D	264 mm	264 mm	381 mm	381 mm
E	311 mm	333 mm	435 mm	463 mm
F	316±6 mm	341±6 mm	338±8 mm	370±8 mm
G	400 mm	400 mm	506 mm	506 mm
H	Stainless steel 1.4301
I	POM-C (FDA)

Electrical interfaces

Not applicable for this type of Asycube.

Mounting purge kit

Not applicable for this type of Asycube.