Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 2024.12 .

WP101 - Set flash duration

Command

WP101=<duration>

Parameters

duration - Flash duration of the backlight in milliseconds, value between 0 and 32767.

Returns

WP00101=<duration>, where

<duration> is the flash duration of the backlight in milliseconds

Description

Use this command to set the flash duration of the backlight for the command KF.

Note

The command RP100 returns the current backlight flash duration.

Usage Example

The example below shows how to set the backlight flash duration to 50 milliseconds. In the sequence below, the initial duration is 300 ms, then a duration of 50 ms is set. Finally the value is confirmed to be correctly set to 50 ms.

Command : RP100
Response : RP00100:00300
Command : WP101=50
Response : WP00101=00050
Command : RP100
Response : RP00100:00050